Three major problems that should be paid attention to in cold storage installation

In daily life, the use of cold storage is very common, we need to install a cold storage before use. If the cold storage is not installed properly, it will affect the subsequent use of the cold storage. Here we will introduce to you the things that should be paid attention to when the cold storage is installed. I think everyone is very concerned about it. Now let's take a look!

In hotter places, the cold storage will not only reduce the cooling efficiency, but also damage the storage board. In addition, the ambient temperature of the unit to ensure normal operation is within 35 degrees. Also leave room for overhauling the unit.

First, the cold storage should be installed in a strong and stable place. The installation of a combined cold storage requires a horizontal concrete base. When the base is tilted and the bump is formed, the base must be repaired and leveled.

Second, the cold storage equipment is installed in a place with good ventilation and low humidity. After the installation is completed, condensation may sometimes appear before the concrete base is dry. When the humidity is abnormally high during the rainy season, condensation will occur on the seams of the board. In the case of small, the condensation will also appear on the insulation board. These are temporary phenomena and should be wiped when necessary.

Third, the cold storage is installed in a place sheltered from the rain. The combined cold storage is used in the house when it is installed outside the house. It is necessary to install a sun and rain cover.

This article mainly introduces the three aspects that should be paid attention to when installing the cold storage. I hope that our introduction can give you some help.